HYDAC直動式溢流閥，溢流閥信號輸出
Operating fluid: Hydraulic oil to DIN 51524 Part 1 and 2
Viscosity range: min. 7.4 mm²/s to max. 420 mm²/s
Filtration: Class 21/19/16 according to ISO 4406
or cleaner
MTTFd
: 150 years
Installation: No orientation restrictions, preferably
horizontal

打開時，關閉端口2的泄漏孔。 額外的彈簧室通風在3號罐到坦克確保閥門獨立于港口2的壓力。
z Hardened and ground internal valve components to ensure minimal wear and
extended service life
z Low pressure drop due to CFD optimized flow path
z Can also be used as a logic element or unloader valve
z Spool orifice available as an option

HYDAC直動式溢流閥，溢流閥信號輸出
閥芯型HYDAC直動式泄壓閥是彈簧加載的滑閥，因為安全原因，
液壓系統的壓力受到限制。 不同的壓力范圍可實現的系統調整。
z Pressure relief function with external venting of spring chamber
z Good, flat curve characteristics throughout the flow range
z External surfaces zinc-nickel plated and corrosion-proof
DB16621E是直接作用的線軸型減壓閥附加彈簧室通風。
當。。。的時候端口1的壓力超過預設值值，閥芯打開，油從中流出端口1到罐口2.當閥門
Operating pressure: max. 350 bar
Spring force: max. 16 bar
Nominal flow: max. 100 l/min
Media operating temperature range: min. -20 °C to max. +120 °C
Ambient temperature range: min. -20 °C to max. +120 °C

，溢流閥信號輸出